ДСТУ Б EN 1090-2:2014
Скачать документ
Формат .docx · доступно зарегистрированным пользователям
(
1 2 з? 3 4 1 2 2.1 2.2 2.2.1 2.2.2 2.2.3 2.2.4 2.2.5 2.2.6 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3 4 4.1 4.1.1 4.1.2 4.1.3 4.1.4 4.2 4.2.1 4.2.2 4.2.3 4.2.4 5 5.1 5.2 5.3 5.3.1 5.3.2 5.3.3 5.3.4 5.4 5.5 5.6 5.6.1 5.6.2 5.6.3 5.6.4 5.6.5 5.6.6 5.6.7 5.6.8 5.6.9 5.6.9.1 5.6.9.2 5.6.10 5.6.11 5.6.12 5.6.13 5.7 5.8 5.9 5.10 5.11 6 6.1 6.2 6.3 6.4 6.4.1 6.4.2 6.4.3 6.4.4 6.5 6.5.1 6.5.2 6.5.3 6.5.4 6.6 6.6.1 6.6.2 6.6.3 6.7 6.8 6.9 6.10 7 7.1 7.2 7.2.1 7.2.2 7.3 7.4 7.4.1 7.4.1.1 7.4.1.2 7.4.1.3 7.4.1.4 7.4.2 7.4.3 7.5 7.5.1 7.5.1.1 7.5.1.2 7.5.2 7.5.3 7.5.4 7.5.5 7.5.6 7.5.7 7.5.8 7.5.8.1 7.5.8.2 7.5.9 7.5.9.1 7.5.9.2 7.5.9.3 7.5.10 7.5.11 7.5.12 7.5.13 7.5.14 7.5.14.1 7.5.14.2 7.5.15 7.5.16 7.5.17 7.5.18 7.6 7.7 7.7.1 7.7.2 7.7.3 8 8.1 8.2 8.2.1 8.2.2 8.2.3 8.2.4 8.3 8.4 8.5 8.5.1 8.5.2 8.5.3 8.5.4 8.5.5 8.5.6 8.6 8.7 8.7.1 8.7.2 8.7.3 8.8 8.8.1 8.8.2 8.8.3 8.8.4 8.9 8.10 9 9.1 9.2 9.3 9.3.1 9.3.2 9.4 9.4.1 9.4.2 9.5 9.5.1 9.5.2 9.5.3 9.5.4 9.5.5 9.5.6 9.6 9.6.1 9.6.2 9.6.3 9.6.4 9.6.5 9.6.5.1 9.6.5.2 9.6.5.3 10 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 10.10 10.10.1 10.10.2 11 11.1 11.2 11.2.1 11.2.2 11.2.2.1 11.2.2.2 11.2.2.3 11.2.2.4 11.2.2.5 11.2.2.6 11.2.3 11.2.3.1 11.2.3.2 11.2.3.3 11.2.3.4 11.2.3.5 11.3 11.3.1 11.3.2 11.3.3 12 12.1 12.2 12.2.1 12.2.2 12.2.3 12.3 12.4 12.4.1 12.4.2 12.4.2.1 12.4.2.2 12.4.2.3 12.4.2.4 12.4.2.5 12.4.3 12.4.4 12.5 12.5.1 12.5.2 12.5.2.1 12.5.2.2 12.5.2.3 12.5.2.4 12.5.2.5 12.5.2.6 12.5.2.7 12.5.3 12.5.3.1 12.5.3.2 12.5.4 12.5.4.1 12.5.4.2 12.5.5 12.5.5.1 12.5.5.2 12.5.5.3 12.6 12.7 12.7.1 12.7.2 12.7.3 12.7.3.1 12.7.3.2 12.7.3.3 12.7.3.4 12.7.3.5 12.7.3.6 12.7.3.7 12.7.4 A.1 A.2 A.3 B.1 B.2 B.2.1 B.2.2 B.2.2.1 B.2.2.2 B.2.2.3 B.3 C.1 C.2 C.2.1 C.2.2 C.2.3 C.2.3.1 C.2.3.2 C.2.3.3 C.2.3.4 C.2.4 D.1 D. 1. 1 D.1 .2 D.1 .3 D.1 .4: D. 1.6: D.1.7 D.1.8 D. 1.9 D.1 .10 D.1 .11 D. 1. 12: D. 1. 13: D. 1. 14: D.1.15 D.2 D.2.1 D.2.2 D.2.3 D.2.4 D.2.5 D.2.6 D.2.7 D.2.8 D.2.9 D.2.10 D.2.1 1 D.2.12 D.2.13 D.2.14 D.2.15 D.2.16 D.2.17 D.2.18 D.2.19 D.2.20 D.2.21 D.2.22 D.2.23 D.2.24 D.2.25 D.2.26 D.2.27 D.2.28 E.1 E.2 E.3 E.4 E.5 F.1 F.1.1 F.1 .2 F.1.3 F.1. 4 F.2 F.2.1 F.2.2 F.3 F.4 F.5 F.6 F.6.1 F.6.2 F.6.3 F.7 F.7.1 F.7.2 F.7.3 F.7.4 G.1 G.2 G.3 G.4 G.5 G.6 J.1 J.2 J.3 K.6 K.7 K.8 M.1 M.2 EN 1090-2:2008+A1:2011 EN 1090-1:2009+A1:2011 Part 1: Requirements for conformity assessment of structural components ( EN 1090-3:2008 Part 3: Technical requirements for aluminium structures. ( - - - -
Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
1 - - - - - - - 2 2.1 2.2 2.2.1 EN 10017, Steel rod for drawing and/or cold rolling - Dimensions and tolerances
EN 10017 EN 10021, General technical delivery conditions for steel products
EN 10021 EN 10024, Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 10024 EN 10025-1:2004, Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10025-1:2004 EN 10025-2, Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
EN 10025-2 EN 10025-3, Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
EN 10025-3 EN 10025-4, Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10025-4 EN 10025-5 , Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN 10025-5 EN 10025-6, Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10025-6 EN 10029, Hot rolled steel plates 3 mm thick or above - To-Tolnrences on dimensions and shape I
EN 10029 EN 10034, Structural steel I and H sections - Tolerances on shape and dimensions
EN 10034 EN 10048, Hot rolled narr ow steel strip - Tolerances on dimensions and shape
EN 10048 EN 10051, IZ Continuously hot-rolled strip and plate/sheet cut from wide strip of nonalloy and alloy steels - Tolerances on dimensions and shape
EN 10051 EN 10055, Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
EN 10055 EN 10056-1, Structural steel equal and unequal leg angles - Part 1: Dimensions
EN 10056-1 EN 10056-2, Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions
EN 10056-2 EN 10058, Hot rolled flat steel bars for general purpose - Dimensions and tolerances on shape and dimensions
EN 10058 EN 10059, Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10059 EN 10060, Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10060 EN 10061, Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions
EN 10061 EN 10080, Steel for the reinforcement of concrete - Weldable reinforcing steel - General
EN 10080 EN 10088-1, Stainless steels - Part 1: List of stainless steels
EN 10088-1 EN 10088-2:2005, Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088-2:2005 EN 10088-3:2005, Stainless steels - Part 3: Technical delivery conditions for semifinished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10088-3:2005 EN 10131, Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape
EN 10131 EN 10139, Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions
EN 10139 EN 10140, Cold rolled narrow steel strip - Tolerances on dimensions and shape
EN 10140 EN 10143, Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 10143 EN 10149-1, Hot-rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions
EN 10149-1 EN 10149-2, Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels
EN 10149-2 EN 10149-3, Hot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels
EN 10149-3 EN 10160, Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10160 EN 10163-2, Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats
EN 10163-2 EN 10163-3, Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
EN 10163-2 EN 10164, Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN 10164 IZ EN 10169, Continuously organic coated (coil coated) steel flat products - Technical delivery conditions Zl
EN 10169 EN 10204, Metallic products - Types of inspection documents
EN 10204 EN 10210-1 , Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10210-1 EN 10210-2 , Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimension and sectional properties
EN 10210-2 EN 10219-1, Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
EN 10219-1 EN 10219-2, Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties
EN 10219-2 EN 10268, Cold rolled steel flat products with high yield strength for cold forming - Technical delivery conditions
EN 10268 EN 10279, Hot rolled steel channels - Tolerances on shape, dimensions and mass
EN 10279 EN 10296-2:2005 , Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
EN 10296-2:2005 EN 10297-2:2005, Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
EN 10297-2:2005 l EN 10346, Continuously hot-dip coated steel flat products - Technical delivery conditions I
EN 10346 EN ISO 1127, Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
EN ISO 1127 IZ EN ISO 9445-1, Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)
EN ISO 9445-1 EN ISO 9445-2, Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009)
EN ISO 9445-2, ISO 4997, Cold-reduced carbon steel sheet of structural quality
ISO 4997 2.2.2 EN 10340:2007, Steel castings for structural uses
EN 10340:2007 IZ EN 1559-1, Founding - Technical conditions of delivery - Part 1: General
EN 1559-1 EN 1559-2, Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
EN -559-2 2.2.3 EN 756, Welding consumables - Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels - Classification
EN 756 EN 757, Welding consumables - Covered electrodes for manual metal arc welding of high strength steels - Classification
EN 757 EN 760, Welding consumables - Fluxes for submerged arc welding - Classification
EN 760 EN 1600, Welding consumables - Covered electrodes for manual metal arc welding of stainle
